UCG Technologies Terms of Service
UCG Technologies VAULT400 Cloud Backup & DRaaS General Enterprise Terms of Service
These General Enterprise Terms of Service (the “General Enterprise Terms”) govern Customer’s use of UCG’s products and services for the enterprise (collectively, the “Products and Services”). The term of these General Enterprise Terms shall be the duration of Customer’s use of the Products and Services. By registering a Customer Account (as defined below) or using any of the Products and Services, Customer agrees to these General Enterprise Terms, including terms that limit UCG Technologies’ liability (see Section 13), require individual arbitration for any potential legal dispute (see Section 16) and authorize contracting through electronic systems (see Section 18). Customer also agrees that certain Products and Services are subject to additional terms, including applicable Product and Service Specific Terms (see Section 2), and “Requirements” and “Restrictions” which mean, respectively, (a) technical requirements and specifications and (b) limitations on Customer’s use of the applicable Products and Services, as such Requirements and Restrictions are set forth in the FAQs or otherwise made known to Customer via the Order Form (as defined below), the website, or Documentation. The Privacy Policy, Requirements, Restrictions, FAQs, website, and other user manuals and information designed to assist Customer in use and operation of the Products and Services (collectively, the “Documentation”), these General Enterprise Terms and the Product and Service Specific Terms (see Section 2) are collectively referred to as the “Agreement”. These General Enterprise Terms apply solely to Products and Services for the enterprise.
1. Parties to the Agreement.
This Agreement is a legal contract between United Computer Group, Inc. dba UCG Technologies or UCG Technologies, Inc. in Canada on behalf of itself and its affiliates and subsidiaries worldwide (collectively, “UCG Technologies”) and the customer identified in an Order Form (“Customer”). Each party represents and warrants that they have the authority to enter into this binding Agreement and doing so does not conflict with any other agreements to which they are a party. If Customer is purchasing Products and Services on behalf of a third party (a “Third Party End-User”), Customer represents and warrants that: (a) it is authorized to make the purchase and enter into the Agreement on behalf of the Third Party End-User as that party’s agent and (b) the Third Party End-User is bound by this Agreement. If Customer enters into this Agreement on behalf of a Third Party End-User, Customer agrees that it is jointly and severally liable for any breach of this Agreement resulting from Customer’s acts and omissions, or the acts and omissions of the Third Party End-User or any Authorized User (as defined below) of the Third Party End-User.
2. Product and Service Specific Terms.
In the event of a conflict between two provisions that appear in different documents, the order of precedence will be the Requirements, the Restrictions, an active Order Form entered into by the parties, the Product and Service Specific Terms listed below (appended to these General Enterprise Terms) as applicable to Order Forms entered into between the parties, the General Enterprise Terms and the provisions in any other parts of the Documentation.
(a) Software. These terms apply to UCG Technologies’ software that is installed and operated on-site at locations that Customer controls (“Software”).
(b) Cloud Services. These terms apply to UCG Technologies’ cloud services (the “Cloud Services”).
(c) Hybrid Solution. These terms apply to UCG Technologies Products and Services that combine Cloud Services and On-Premise Software Products (together, the “Hybrid Solutions”).
(d) Hardware. These terms apply to the sale of hardware by UCG Technologies to Customer (“Hardware”).
(e) DRaaS Solution. These terms apply to VAULT400 Disaster Recovery as-a-Service (“DRaaS Solution”).
(f) Technical Support Services. These terms apply to UCG Technologies’ technical support services (“Technical Support Services”).
(g) Website Terms of Use. These terms apply to Customer’s use of UCG Technologies’ websites and portals.
3. HIPAA Business Associate Agreement.
If Customer is subject to the Health Insurance Portability and Accountability Act of 1996, as amended (“HIPAA”), as a Covered Entity or Business Associate (as defined in HIPAA) and uses the Products and Services in a manner that causes UCG Technologies to create, receive, maintain, or transmit Protected Health Information on Customer’s behalf, please contact a representative at support@ucgtechnologies.com, in order to use the Products and Services in a compliant manner.
4. Customer Account Registration.
Customers may be required to register an account with UCG Technologies (a “Customer Account”) in order to use certain Products and Services. During registration of a Customer Account, Customer agrees to provide accurate and complete information in response to UCG Technologies’ questions, and Customer further agrees to promptly update this information should it change. In connection with use of the Customer Account, a Customer may authorize itself and/or one or more of its employees, consultants, vendors or agents (collectively, “Authorized Users”) to use the Products and Services on Customer’s behalf. Each Authorized User will establish or be provided a username and password, and may also establish or be provided other access credentials, such as an encryption key (collectively, “Access Credentials”). Customer will, and will ensure that each Authorized User will, keep the Access Credentials confidential and ensure that they are not disclosed to any third party. Customer is responsible for the acts and omissions of its Authorized Users as if all such Authorized Users are Customer’s employees. Customer, and not UCG Technologies, is fully responsible for all activity that occurs under Customer’s Account using the Access Credentials, including any loss of Customer Content (as defined below). UCG Technologies reserves the right to suspend or terminate a Customer Account, or the access of any Authorized User, for any reason, including if any registration information is inaccurate, untrue or incomplete, or if Customer or any of Customer’s Authorized Users fail to maintain the security of any Access Credentials. Customer agrees to, and will ensure that each Authorized user will notify UCG Technologies immediately upon learning of any unauthorized access to a Customer Account or any other suspected security breach.
5. Access Authorization.
Subject to the terms and conditions of this Agreement, Customer and its Authorized Users may access and use customer portals (the “Customer Portals”) that are made available to Customer in connection with the Products and Services, solely for internal business operations and solely in accordance with the Documentation. Customer’s authorization to use the Customer Portals is non-exclusive, non-transferable, non-sublicensable and terminable.
6. Customer Acknowledgements and Obligations.
Customer agrees to the following:
(a) License. Customer grants to UCG Technologies a worldwide, non-exclusive, royalty-free, fully-paid up, transferable and sub-licensable right to use, reproduce and store the Customer Content for the purpose of performing this Agreement, and improving the Products and Services. Customer retains all rights in the Customer Content, subject to the rights granted to UCG Technologies in the Agreement. Customer may modify or remove the Customer Content via the Customer Account. Customer Content will be irretrievably deleted upon (i) Customer’s or its Authorized Users deletion of Customer Content or (ii) cancellation, termination or non-renewal of the Customer Account or subscription to the Products and Services. UCG Technologies may remove Customer Content at any time, for any reason, with or without notice.
(b) Requirements and Environment. UCG Technologies offers many different Products and Services, with different Restrictions and Requirements, each of which are designed to address the needs of a broad range of customers. Customer acknowledges and agrees that: (i) Customer has assessed its data protection needs, network environment and the technical specifications and cost of each of the Products and Services; (ii) Customer is solely responsible for making the appropriate selection of the Products and Services even if a UCG Technologies representative has provided guidance to Customer regarding the Products or Services that Customer selects; (iii) Customer is solely responsible for ensuring that Customer complies with the applicable Requirements and Restrictions; and (iv) Customer is solely responsible for ensuring that Customer maintains and operates the information technology infrastructure from which the applicable Products and Services copies, maintains and transfers the Customer Content, including the databases, applications, files, software, computer, server, tablet, smartphone or any other device registered with UCG Technologies (including, to the extent applicable, hardware delivered to Customer as part of any Product or Service) (collectively, the “Customer Environment”).
(c) Customer Conduct. The Products and Services include functionality that enables Customer and its Authorized Users to copy, maintain, sync, transfer and upload text, graphics, photos, videos, presentations and other materials or information (“Customer Content”) pursuant to the terms of this Agreement, including the Requirements and Restrictions. Customer represents and warrants that its Customer Content and Customer’s, and its Authorized User’s, use of the UCG Technologies website, portals, Products and Services, and the technology related thereto, shall not (i) interfere with the proper working of the Products and Services or impose an unreasonably large load on UCG Technologies infrastructure; (ii) give rise to civil or criminal liability, e.g. defamatory, threatening, pornographic, indecent, abusive, libelous or otherwise objectionable actions; (iii) violate or infringe upon any third party right, including any intellectual property right or right of privacy, or that abuses, harasses or stalks any other person; or (iv) initiate a denial of service attack, software viruses or other harmful or deleterious computer code, files or programs such as Trojan horses, worms, time bombs, cancel bots, or spyware.
(d) User Restrictions on Intellectual Property. Customer acknowledges and agrees that it shall not, and shall ensure its Authorized Users do not: (i) access or use the Products and Services in any manner or for any purpose other than expressly permitted by the Documentation; (ii) change, modify or otherwise create derivative works of all or any portion of the Products and Services; (iii) modify, disassemble, decompile or reverse engineer any part of the Products and Services or apply any other process or procedure to derive source code of any software included in the Products and Services (except solely to the extent permitted by applicable law); (iv) access or use the Products and Services in a way intended to avoid exceeding usage limits or quotas; (v) use the Products and Services in order to build a similar or competitive application or service; (vi) remove, tamper with or alter any disabling mechanism or circumvent any technical protection measures associated with the Products and Services, or otherwise use any tool to enable features or functionalities that are otherwise disabled in the Products and Services; (vii) resell or sublicense the Products and Services (except as solely to the extent permitted by applicable law); or (viii) remove or alter any proprietary notices (e.g., copyright and trademark notices) pertaining to the Products and Services.
(e) Changes to Products and Services. Customer acknowledges and agrees that UCG Technologies may, at any time and without notice to Customer, discontinue, suspend or modify (i) the Products and Services, (ii) any functionality or feature of the Product and Services or (iii) the availability of the Products and Services on any particular device or hardware.
(f) Law Enforcement. If UCG Technologies reasonably suspects that Customer’s Account has been used for an unauthorized, illegal or criminal purpose, or law enforcement requests access to Customer’s Account or Customer Content via a validly issued subpoena, an investigative demand or warrant, Customer hereby gives UCG Technologies express authorization to share information about Customer, its Customer Account, Customer Content, and any of its transactions with law enforcement.
7. Fees and Payment.
(a) Fees. Customer agrees to pay all fees, charges and expenses (collectively, the “Fees”) listed on the applicable invoice thirty (30) days from the date of receipt of invoice, unless otherwise specified in an Order Form. Unless otherwise indicated in the applicable Order Form, all Fees exclude sales, use, value-add and similar taxes (collectively, “Sales and Use Taxes”), import tariffs, and shipping and handling fees, which shall be the responsibility of the Customer. Customer shall indemnify, defend and hold UCG Technologies harmless for any liability or expense UCG Technologies may incur in connection with the failure to pay, or collection of, any Fees, Sales and Use Taxes, import tariffs or shipping and handling fees. Any portion of the Fees that is not paid when due will accrue interest at one and one-half percent (1.5%) per month or the maximum rate permitted by applicable law, whichever is less, from the due date until paid. Customer shall pay the Fees without offset or deduction.
(b) Overage Fees. If Customer exceeds the data storage capacity limits indicated in the applicable Order Form, Customer agrees to pay the then-current overage fees applicable to the Products and Services pursuant to the Documentation and UCG Technologies reserves the right to suspend or throttle use of the Products and Services so Customer is using the Products and Services in accordance with the data storage capacity indicated in the applicable Order Form.
(c) Order Forms. Customer purchases a Product or Service by: (a) executing an Order Form or (b) purchasing a Product or Service through a third party that is authorized to resell the UCG Technologies Products and Services (each such entity, including managed service providers, an “Authorized Partner”). The UCG Technologies document, in either electronic or paper form, that establishes the Products and Services purchased, the Fees (if any) to be paid, any special Restrictions and other material business terms is called an “Order Form.” UCG Technologies reserves the right to terminate the delivery of any Products or Services in the event that any order between Customer and any Authorized Partner differs from the corresponding order received by UCG Technologies from the Authorized Partner. Customer acknowledges that any Authorized Partner is an independent contractor and not acting on behalf of UCG Technologies.
(d) Credit History. Acceptance of any Order Form by UCG Technologies and applicability of UCG Technologies’ standard payment terms are subject to UCG Technologies review of Customer’s credit history and rating. If a Customer’s credit history does not meet UCG Technologies acceptance criteria, UCG Technologies may (i) deny Customer’s Order Form or (ii) require Customer to make deposits and up-front payments until an acceptable credit history is established.
(e) Payment on Credit Cards. Not accepted.
(f) Subscription Renewals.
Charges for Auto-Renewing Subscription Services. If Customer purchases Products and Services sold on a subscription basis (a “Subscription Service”), Customer shall be billed renewal Fees on the first day of the Renewal Term and such Fees may be different than the initial subscription Fee. If Customer cancels a Subscription Service (as provided in Section 8, below), Customer will continue to have access to that Subscription Service through the end of the then-current Subscription Term, but Customer will not be entitled to a refund or credit for any Fees already due or paid. UCG Technologies reserves the right to change UCG Technologies’ Fees associated with any Subscription Service upon thirty (30) days’ advance notice. Customer’s continued use of Subscription Services after notice of a change to UCG Technologies’ Fees will constitute Customer’s agreement to such changes.
8. Term and Termination.
(a) Term. The initial length of time that Customer is authorized to use any Product or Service will be as set forth in the applicable Order Form (the “InitialTerm”). The Initial Term will automatically renew (each, a “Renewal Term”) unless either party provides the other party notice of its intent to terminate the Renewal Term 90 days prior to the end of the term. Collectively, the Initial Term and any Renewal Term(s) are referred to as the “Term”. If no Renewal Term is identified in the Order Form, the Renewal Term will be the same length of time as the Initial Term. Notice of any termination under Section 8(a), 8(b) or 8(c) of these General Enterprise Terms may be given by emailing support@ucgtechnologies.com
(b) Termination for Material Breach. UCG Technologies may terminate any Order Form and this Agreement at its discretion, effective immediately upon written notice, if Customer materially breaches any provision of this Agreement as it relates to the applicable Order Form and this Agreement and does not substantially cure the breach within thirty (30) days after receiving written notice.
(c) Termination upon Bankruptcy or Insolvency. UCG Technologies may, at its option, terminate any Order Form and this Agreement immediately upon written notice to Customer, in the event: (i) Customer becomes insolvent or unable to pay its debts when due; (ii) Customer files a petition in bankruptcy, reorganization or similar proceeding, or, if filed against Customer, such petition is not removed within ninety (90) days after such filing; (iii) Customer discontinues its business; or (iv) a receiver is appointed or there is an assignment for the benefit of Customer’s creditors.
(d) Suspension. UCG Technologies may, at any time and in its sole discretion, suspend access to any Product or Service for one or all of Customer’s Authorized Users, including but not limited to, the following reasons: (i) a threat to the security or integrity of the Products and Services; (ii) Customer has materially breached this Agreement or (iii) any amount due under this Agreement is not received by UCG Technologies within fifteen (15) days after it was due.
(e) Effects of Termination. Upon termination or expiration of an Order Form or this Agreement for any reason: (i) any amounts owed to UCG Technologies before such termination or expiration will become immediately due and payable; (ii) all license and access rights granted will immediately cease; (iii) access to Customer Content will immediately cease; (iv) all Customer Content will be irretrievably deleted; and (v) if Customer’s subscription included Appliance Hardware (as defined in the Hybrid Terms), Customer will return the Appliance Hardware in accordance with the Hybrid Terms. Those provisions of this Agreement that by their nature are intended to survive termination or expiration of an Order Form or this Agreement shall so survive.
9. Security.
UCG Technologies has implemented administrative, physical and technical safeguards designed to secure Customer Content from accidental loss and unauthorized access, use, alteration or disclosure. However, UCG Technologies cannot guarantee that unauthorized third parties will never be able to defeat UCG Technologies’ safeguards or use the Customer Account and Customer Content for improper purposes. Customer provides its Customer Account details and Customer Content to UCG Technologies at its own risk. Customer is solely responsible for safeguarding, and ensuring that its Authorized Users safeguard, the Access Credentials.
10. Proprietary Rights.
(a) Reservation of Rights. As between the parties, Customer acknowledges and agrees that the software, code, hardware, trademarks, trade secrets, proprietary methods and systems used to provide the Products and Services and the content made available or displayed by UCG Technologies through the Products and Services, including all text, graphics, images and the look and feel of such Products and Services (collectively “UCG Technologies’ Content”) are owned by or licensed to UCG Technologies, including all intellectual property rights therein. Nothing in this Agreement or any of the Documentation shall be considered an assignment or other transfer of ownership in and to UCG’s Technologies or Content to Customer, either expressly, or by implication, estoppel, or otherwise. Other than the authorizations or licenses as may be conferred or granted by UCG Technologies to Customer in this Agreement or any of the Documentation, UCG Technologies reserves all right, title and interest in and to UCG Technologies and UCG Technologies Content. No right or license is granted by UCG Technologies to Customer or its Authorized Users to use any UCG Technologies trademark, trade name, service mark, product name or other source designator.
(b) Professional Services; Managed Services. Pursuant to a written statement of work, Customer may purchase professional services or managed services from UCG Technologies. All changes, upgrades, updates, improvements or other modifications to UCG’s Technology and Content as may be created in the course of any such statement of work shall be owned exclusively by UCG Technologies. All changes, upgrades, updates, improvements, or other modifications to Customer Content or Customer’s proprietary technology as may be created in the course of any such statement of work shall be owned exclusively by Customer.
(c) Continuous Development. UCG Technologies may continually develop and provide ongoing innovation to the Products and Services in the form of new features, functionality, and efficiencies. In the event UCG Technologies adds new features or functionality (collectively, “Functionality”) to a particular Product or Service, UCG Technologies may offer the Functionality to Customer at no additional charge or, if UCG Technologies generally charges customers for such functionality, UCG Technologies may condition Customer’s use of the Functionality on the payment of additional Fees.
(d) Feedback. In the course of using the Products and Services, Customer or Authorized Users may provide UCG Technologies reports, comments, suggestions or ideas relating the Products and Services (“Feedback”). UCG Technologies shall have no obligation to incorporate Feedback into any Product or Service, and Customer shall have no obligation to provide Feedback. UCG Technologies shall have no obligation to treat such Feedback as Customer’s confidential or trade secret information. Customer, on behalf of itself and its successors in interest, grants UCG Technologies a world-wide, non-exclusive, irrevocable, perpetual, royalty-free and fully paid-up right and license to use, profit from, disclose, publish, or otherwise exploit any Feedback. Without limiting the generality of the foregoing, Customer agrees that its provision of Feedback does not give it any intellectual property or any other right, title, or interest in or to any aspects of the Products and Services, even if such Feedback leads Company to create new Products or Services. No representations, warranties, or indemnities as may be granted by either party to the other under this Agreement or the Documents shall apply to Feedback.
(e) Open Source Software. The Products and Services may contain redistributables, agents or other code resident on Customer’s devices that includes open source software.
11. Audits.
Customer acknowledges and agrees UCG Technologies shall have the right to audit Customer records upon reasonable written notice in order to ensure compliance with the terms of this Agreement. Audits may be conducted by UCG Technologies personnel or by an independent third-party auditor appointed by UCG Technologies. Customer shall grant UCG Technologies and/or an independent third-party auditor appointed by UCG Technologies reasonable access to its personnel, records and facilities during normal business hours for such purpose. In the event that results of the audit indicate that Customer has underpaid any Fees, UCG Technologies will deliver to Customer an invoice and Customer agrees to pay the applicable amount within fifteen (15) days of receipt of the applicable invoice. UCG Technologies will pay for the cost of the audit unless, as a result of the audit the discrepancy between the amount owed and the amount previously paid is greater than five percent (5%), in which case Customer will reimburse UCG Technologies for the reasonable costs of the audit.
12. General Disclaimers.
THE USE OF “UCG TECHNOLOGIES” IN SECTIONS 9, 11, 12, 13, AND 14 MEANS UCG TECHNOLOGIES, ITS AFFILIATES, PARTNERS, PROCESSORS, SUPPLIERS, AND LICENSORS (AND THEIR RESPECTIVE SUBSIDIARIES, AFFILIATES, AGENTS, DIRECTORS AND EMPLOYEES). THE PRODUCTS AND SERVICES ARE PROVIDED “AS IS” WITHOUT REPRESENTATION OR WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY. WITHOUT LIMITING THE FOREGOING, UCG TECHNOLOGIES SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, TITLE AND QUIET ENJOYMENT OR FROM A COURSE OF DEALING, COURSE OF PERFORMANCE OR USAGE IN TRADE. UCG TECHNOLOGIES DOES NOT WARRANT (AND SPECIFICALLY DISCLAIMS) THAT THE PRODUCTS AND SERVICES ARE ACCURATE, RELIABLE OR CORRECT, THAT THE PRODUCTS AND SERVICES WILL MEET CUSTOMER’S REQUIREMENTS, THAT THE PRODUCTS AND SERVICES WILL BE AVAILABLE AT ANY PARTICULAR TIME OR LOCATION, BE UNINTERRUPTED, ERROR-FREE OR WITHOUT DEFECT, THAT ANY DEFECTS OR ERRORS WILL BE CORRECTED, THAT THE PRODUCTS AND SERVICES ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS, OR THAT ANY ENCRYPTION ALGORITHMS, ASSOCIATED KEYS AND OTHER SECURITY MEASURES WILL BE SECURE OR EFFECTIVE OR THAT THE PRODUCTS AND SERVICES GENERALLY WILL BE SECURE. UCG TECHNOLOGIES DOES NOT WARRANT THAT THE PRODUCTS AND SERVICES: (i) WILL RUN PROPERLY ON ALL HARDWARE OR INFORMATION TECHNOLOGY ENVIRONMENTS; OR (ii) WILL MEET CUSTOMER’S NEEDS OR REQUIREMENTS OR THOSE OF CUSTOMER’S AUTHORIZED USERS; OR (iii) WILL OPERATE IN COMBINATIONS THAT MAY BE SELECTED FOR USE BY CUSTOMER OR CUSTOMER’S AUTHORIZED USERS.
13. Specific Disclaimers.
(a) CUSTOMER ASSUMES ALL RESPONSIBILITY FOR THE SELECTION AND USE OF AND RESULTS OBTAINED FROM THE PRODUCTS AND SERVICES.
(b) CUSTOMER ASSUMES ALL RESPONSIBILITY AND LIABILITY FOR THE SECURITY OF CUSTOMER'S CONTENT IF CUSTOMER DISABLES ANY ENCRYPTION FEATURES WITHIN THE PRODUCTS AND SERVICES.
(c) CUSTOMER’S ACCESS TO AND USE OF THE PRODUCTS AND SERVICES ARE AT ITS SOLE DISCRETION AND RISK AND CUSTOMER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO CUSTOMER’S DEVICE OR ENVIRONMENT, ANY HARDWARE PROVIDED AS PART OF THE PRODUCTS AND SERVICES, AND THE LOSS OR DAMAGE OF CUSTOMER’S CUSTOMER CONTENT.
(d) DEPENDING ON THE PRODUCTS AND SERVICES CUSTOMER CHOOSES TO UTILIZE, CUSTOMER’S CONTENT MAY NOT BE AVAILABLE OR RESTORABLE IF:
(i) THE PRODUCTS OR SERVICES HAVE NOT COMPLETED COPYING, SYNCING, TRANSFERRING, OR UPLOADING (COLLECTIVELY, “BACKUP”) CUSTOMER’S CONTENT;
(ii) FOR FILES, FOLDERS, DATABASES, SERVERS, OR DRIVES THAT THE PRODUCTS AND SERVICES DO NOT AUTOMATICALLY BACK UP PURSUANT TO THE DOCUMENTATION, CUSTOMER DOES NOT MANUALLY SELECT FOR BACKUP OR CUSTOMER DESELECTS CERTAIN FILES, FOLDERS, DEVICES, DATABASES, SERVERS OR DRIVES FOR BACKUP;
(iii) CUSTOMER DELETES CERTAIN CUSTOMER CONTENT FROM CUSTOMER’S DEVICE AND DOES NOT RESTORE IT AFTER DELETION PURSUANT TO UCG TECHNOLOGIES’ OR CUSTOMER’S OWN DATA RETENTION POLICIES, OR CUSTOMER DELETES A DEVICE, DATABASE, DRIVE, OR SERVER FROM CUSTOMER’S ACCOUNT;
(iv) CUSTOMER MOVES CUSTOMER CONTENT TO A LOCATION ON CUSTOMER’S DEVICE THAT IS NOT AUTOMATICALLY SCANNED TO SELECT FILES FOR BACKUP, OR CUSTOMER UPGRADES CUSTOMER’S OPERATING SYSTEM RESULTING IN CHANGES TO CUSTOMER’S FILE MAPPING;
(v) CUSTOMER’S CONTENT IS CORRUPTED;
(vi) CUSTOMER’S DEVICE IS UNABLE TO ACCESS THE INTERNET OR NETWORK SERVICE OR HAS EXPERIENCED INTERMITTENT OR SLOW INTERNET CONNECTION;
(vii) ANY HARDWARE PROVIDED TO CUSTOMER AS PART OF THE PRODUCTS AND SERVICES IS UNABLE TO CONNECT TO CUSTOMER’S DEVICES AND CUSTOMER DOES NOT TAKE STEPS NECESSARY TO CORRECT SUCH PROBLEM;
(viii) CUSTOMER’S DEVICE OR ANY HARDWARE IS UNABLE TO MAKE A CONNECTION WITH UCG TECHNOLOGIES’ SERVERS OR NETWORK;
(ix) CUSTOMER FAILS TO FOLLOW UCG TECHNOLOGIES’ TECHNICAL REQUIREMENTS AND THE DOCUMENTATION FOR UTILIZING THE PRODUCTS AND SERVICES, INCLUDING UPGRADING THE PRODUCTS AND SERVICES OR FAILING TO PERIODICALLY TEST CUSTOMER’S BACKUPS AND RESTORES OR TO ENSURE THAT CERTAIN CUSTOMER CONTENT IS BACKED UP; OR
(x) CUSTOMER TERMINATES OR FAILS TO RENEW CUSTOMER’S LICENSE OR SUBSCRIPTION TO ANY PRODUCT OR SERVICE, OR CUSTOMER’S ACCESS TO THE PRODUCTS AND SERVICES HAS OTHERWISE BEEN TERMINATED OR SUSPENDED.
(e) THE PRODUCTS AND SERVICES MAY ACCESS AND TRANSFER INFORMATION OVER THE INTERNET. CUSTOMER ACKNOWLEDGES AND AGREES THAT UCG TECHNOLOGIES DOES NOT OPERATE OR CONTROL THE INTERNET AND THAT: (i) VIRUSES, WORMS, TROJAN HORSES AND OTHER UNDESIRABLE DATA OR COMPONENTS; OR (ii) UNAUTHORIZED USERS (E.G., HACKERS) MAY ATTEMPT TO OBTAIN ACCESS TO AND DAMAGE CUSTOMER’S CUSTOMER CONTENT, WEBSITES, DEVICES AND NETWORKS. CUSTOMER ACKNOWLEDGES AND AGREES UCG TECHNOLOGIES IS NOT RESPONSIBLE FOR SUCH ACTIVITIES.
(f) IF APPLICABLE, CUSTOMER ACKNOWLEDGES AND AGREES TO UCG TECHNOLOGIES’ USE OF CYBERSOURCE, A SUBSIDIARY OF VISA, AND LITLE & CO., A SUBSIDIARY OF VANTIV, TO PROCESS AND STORE CUSTOMER’S CREDIT CARD INFORMATION. IN THE EVENT OF A SECURITY BREACH INVOLVING CUSTOMER’S CREDIT CARD INFORMATION, CUSTOMER ACKNOWLEDGES AND AGREES THAT CUSTOMER’S SOLE RECOURSE IS AGAINST THESE THIRD-PARTY VENDORS WHO PROCESS AND STORE CUSTOMER’S CREDIT CARD INFORMATION, AND NOT UCG TECHNOLOGIES.
(g) CUSTOMER IS SOLELY RESPONSIBLE FOR THE SECURITY AND INTEGRITY OF THE CUSTOMER ACCOUNT, CUSTOMER’S CONTENT, DEVICES AND ANY HARDWARE PROVIDED AS PART OF THE PRODUCTS AND SERVICES. CUSTOMER ACKNOWLEDGES AND AGREES THAT UCG TECHNOLOGIES SHALL HAVE NO LIABILITY ASSOCIATED WITH OR ARISING FROM CUSTOMER’S FAILURE TO MAINTAIN ACCURATE ACCOUNT INFORMATION OR OTHER INFORMATION, INCLUDING, BUT NOT LIMITED TO, CUSTOMER’S FAILURE TO RECEIVE CRITICAL COMMUNICATION ABOUT THE PRODUCTS AND SERVICES.
(h) CUSTOMER ACKNOWLEDGES AND AGREES THAT NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY UCG TECHNOLOGIES OR ANY UCG TECHNOLOGIES EMPLOYEE, PARTNER OR AGENT WILL CREATE ANY WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF UCG TECHNOLOGIES’ OBLIGATIONS HEREUNDER.
14. Disclaimers of and Limitations on Certain Remedies.
(a) No Consequential and Similar Damages. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL UCG TECHNOLOGIES BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, EXEMPLARY, SPECIAL OR ANY OTHER DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR PERSONAL INJURY, LOST PROFITS, LOSS OF DATA, LOSS OF CUSTOMER CONTENT, LOSS OF USE, LOST REVENUE, BUSINESS INTERRUPTION OR PROPERTY OR ENVIRONMENT DAMAGE ARISING OUT OF OR RELATED TO CUSTOMER’S USE OF THE PRODUCTS AND SERVICES, EVEN IF UCG TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES (WHETHER SUCH CLAIM IS BASED ON WARRANTY, CONTRACT, TORT (INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE) OR OTHERWISE).
(b) No Procurement of Substitute Products and Services or Customer Content. IN NO EVENT WILL UCG TECHNOLOGIES BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY COST TO PROCURE SUBSTITUTE PRODUCTS OR SERVICES, CUSTOMER CONTENT, LOST OR DAMAGED CUSTOMER CONTENT OR THE COST OF RETRIEVING LOST CUSTOMER CONTENT. UNDER NO CIRCUMSTANCES WILL UCG TECHNOLOGIES BE RESPONSIBLE FOR ANY DAMAGE, LOSS OR INJURY RESULTING FROM HACKING, TAMPERING OR OTHER UNAUTHORIZED ACCESS OR USE OF THE PRODUCTS AND SERVICES, CUSTOMER’S ACCOUNT OR THE CUSTOMER CONTENT.
(c) Limitation on Aggregated Damages. TO THE MAXIMUM EXTENT PERMITTED BY LAW, AND WITHOUT LIMITING THE FOREGOING, THE ENTIRE LIABILITY OF UCG TECHNOLOGIES FOR ALL DAMAGES OF EVERY KIND AND TYPE (WHETHER ARISING IN CONTRACT, BREACH OF WARRANTY OR TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY)) WILL BE LIMITED TO THE LESSER OF: (i) THE FEES PAID BY CUSTOMER TO UCG TECHNOLOGIES IN THE THREE (3) CALENDAR MONTHS IMMEDIATELY PRIOR TO THE DAMAGES ARISING; OR (ii) TWO THOUSAND FIVE HUNDRED DOLLARS ($2,500.00). IF THE PRODUCTS AND SERVICES ARE PROVIDED TO CUSTOMER WITHOUT CHARGE, THEN UCG TECHNOLOGIES WILL HAVE NO LIABILITY TO CUSTOMER WHATSOEVER. THE FOREGOING LIMITATIONS SET A LIMIT ON THE AMOUNT OF DAMAGES PAYABLE AND ARE NOT INTENDED TO ESTABLISH LIQUIDATED DAMAGES.
(d) CUSTOMER EXPRESSLY RECOGNIZES AND ACKNOWLEDGES THAT THE DISCLAIMERS AND LIMITATIONS SET FORTH IN THIS SECTION ARE AN ESSENTIAL PART OF THE AGREEMENT AND AN ESSENTIAL FACTOR IN ESTABLISHING THE PRICE OF THE PRODUCTS AND SERVICES AND UCG TECHNOLOGIES’ WILLINGNESS TO PROVIDE CUSTOMER THE PRODUCTS AND SERVICES. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR THE LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, THEREFORE SOME OF THE FOREGOING TERMS MAY NOT APPLY TO CUSTOMER.
(e) THE FOREGOING DISCLAIMERS AND LIMITATIONS WILL APPLY TO THE FULLEST EXTENT PERMITTED UNDER APPLICABLE LAW AND NOTWITHSTANDING A FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY PROVIDED IN THIS AGREEMENT.
15. Indemnity.
Customer will indemnify, defend and hold UCG Technologies (and its processors, respective employees, directors, agents, affiliates and representatives) harmless from and against any and all claims, costs, losses, damages, judgments, tax assessments, penalties, interest and expenses (including, without limitation, reasonable attorneys’ fees) arising out of any claim, action, audit, investigation, inquiry or other proceeding instituted by a person or entity that arises out of or relates to: (a) any actual or alleged breach of Customer’s representations, warranties or obligations set forth in this Agreement; (b) Customer’s wrongful or improper use of the Products and Services; (c) Customer’s violation of any third party’s rights, including without limitation, any right of privacy, publicity rights or intellectual property rights; (d) Customer’s violation of any law, rule or regulation of the United States or any other country; and (e) any other party’s access and/or use of the Products or Services using Customer’s Access Credentials or the Access Credentials of any of Customer’s Authorized Users. UCG Technologies reserves the right, at Customer’s expense, to assume the exclusive defense and control of any matter for which Customer is required to indemnify UCG Technologies and Customer agrees to cooperate with UCG Technologies’ defense of these claims. Customer agrees not to settle any matter without UCG Technologies’ prior written consent. UCG Technologies will use reasonable efforts to notify Customer of any such claim, action or proceeding upon becoming aware of it.
16. Export Controls and Trade Sanctions Compliance.
Customer’s use of the Products and Services is subject to compliance with United States and other applicable export control and trade sanctions laws, rules and regulations, including without limitation, the U.S. Export Administration Regulations, administered by the U.S. Department of Commerce’s Bureau of Industry and Security (“BIS”) and U.S. trade sanctions, administered by the U.S. Department of the Treasury’s Office of Foreign Assets Control (“OFAC”) (collectively, “Export Control Laws”). Customer will not export, re-export, download or otherwise transmit the Products and Services, or technical data relating thereto, in violation of any applicable Export Control Laws. In particular, Customer acknowledges that the Products and Services, or any part thereof, may not be exported, transmitted, or re-exported to, or otherwise used in: (a) any country subject to a U.S. embargo or comprehensive trade sanctions or that has been designated a state sponsor of terrorism by the U.S. Government (“Sanctioned Countries”); or (b) anyone identified on any U.S. Government restricted party lists (including without limitation, the Specially Designated Nationals and Blocked Persons List, Sectoral Sanctions Identifications List, and Foreign Sanctions Evaders List, administered by OFAC, and the Entity List, Denied Persons List, and Unverified List administered by BIS) (collectively, “Restricted Party Lists”). By purchasing a Product or Service, Customer represents and warrants that it is not located in any Sanctioned Country or on any Restricted Party List. Customer acknowledges that the Products and Services may not be available in all jurisdictions and that Customer is solely responsible for complying with applicable Export Control Laws related to the manner in which Customer chooses to use the Products and Services, including Customer’s transfer and processing of the Customer Content and the region in which any of the foregoing occur.
17. Dispute Resolution.
Please read the following arbitration agreement in this Section 16 carefully (“Arbitration Agreement”). It requires Customer to arbitrate disputes with UCG Technologies and limits the manner in which Customer can seek relief from UCG Technologies.
(a) Applicability of Arbitration Agreement, Rules and Forum. Customer agrees that any dispute or claim relating in any way to this Agreement, including but not limited to, arbitrability of the matter or the formation, interpretation, scope, applicability, termination or breach of this Agreement, the Customer’s access or use of the Products and Services, or to any aspect of Customer’s relationship with UCG Technologies, will be resolved by binding arbitration, rather than in court. This Arbitration Agreement will apply to all claims that arose or were asserted before the effective date of this Agreement or any prior version of this Agreement. Such disputes and claims shall be referred to and finally determined by arbitration in accordance with the JAMS Streamlined Arbitration Rules and Procedures, or JAMS International Arbitration Rules, if the matter is deemed “international” within the meaning of that term as defined in the JAMS International Arbitration Rules. The arbitration shall be administered by JAMS, shall take place before a sole arbitrator, and shall be conducted in Cleveland, Ohio. If the JAMS International Arbitration Rules apply, the language to be used in the arbitral proceedings will be English. Judgement upon the arbitral award may be entered by any court having jurisdiction.
(b) Waiver of Jury Trial. CUSTOMER AND UCG TECHNOLOGIES HEREBY WAIVE ANY CONSTITUTIONAL AND STATUTORY RIGHTS TO SUE IN COURT AND HAVE A TRIAL IN FRONT OF A JUDGE OR A JURY. Customer and UCG Technologies are instead electing that all claims and disputes will be resolved by final, binding arbitration under this Arbitration Agreement. An arbitrator can award on an individual basis the same damages and relief as a court and must follow this Agreement as a court would. However, there is no judge or jury in arbitration and court review of an arbitration award is subject to very limited review.
(c) Waiver of Class or Consolidated Actions. IF CUSTOMER AGREES TO THIS AGREEMENT AND/OR USES THE PRODUCTS AND SERVICES, CUSTOMER IS AGREEING IN ADVANCE THAT CUSTOMER WILL NOT PARTICIPATE IN OR SEEK TO RECOVER MONETARY OR OTHER RELIEF IN ANY LAWSUIT FILED AGAINST UCG TECHNOLOGIES ALLEGING CLASS, COLLECTIVE AND/OR REPRESENTATIVE CLAIMS ON CUSTOMER’S BEHALF. INSTEAD, BY AGREEING TO ARBITRATION, CUSTOMER MAY BRING CUSTOMER’S CLAIMS AGAINST UCG TECHNOLOGIES IN AN INDIVIDUAL ARBITRATION PROCEEDING. CLAIMS OF MORE THAN ONE CUSTOMER OR USER CANNOT BE ARBITRATED OR CONSOLIDATED WITH THOSE OF ANY OTHER CUSTOMER OR USER. CUSTOMER ACKNOWLEDGES THAT CUSTOMER HAS BEEN ADVISED THAT CUSTOMER MAY CONSULT WITH AN ATTORNEY IN DECIDING WHETHER TO ACCEPT THIS AGREEMENT PRIOR TO USING THE PRODUCTS AND SERVICES, INCLUDING THIS ARBITRATION AGREEMENT. If a court decides that applicable law precludes enforcement of any of this Section’s limitations as to a particular claim for relief, then that claim (and only that claim) must be severed from the arbitration and may be brought in court, subject to Customer’s and UCG Technologies’ rights to appeal the court’s decision. All other claims will be arbitrated.
(d) Severability. Except as otherwise provided under the terms and conditions of this Arbitration Agreement, if any part or parts of this Arbitration Agreement are found under the law to be invalid or unenforceable, then such specific part or parts will be of no force and effect and will be severed and the remainder of the Arbitration Agreement will continue in full force and effect.
(e) Survival of Agreement. This Arbitration Agreement will survive the termination of Customer’s relationship with UCG Technologies.
(f) Modification. Notwithstanding any provision in this Agreement to the contrary, it is agreed that if UCG Technologies makes any future material change to this Arbitration Agreement, it will not apply to any individual claim(s) already in progress or that Customer has already provided written notice to UCG Technologies.
18. Governing Law.
These General Enterprise Terms and any dispute arising hereunder will be governed by the laws of the Commonwealth of Ohio and/or applicable federal law (including the Federal Arbitration Act) without regard to its choice of law or conflicts of law principles. To the extent the parties are permitted under this Agreement to initiate litigation in a court, both Customer and UCG Technologies agree that all claims and disputes arising out of or relating to the Agreement will be litigated exclusively in the state or federal courts located in Cleveland, Ohio.
19. Electronic Communications.
By using the Products and Services, Customer acknowledges that UCG Technologies shall communicate with Customer electronically using the email address in the Customer Account. It is the Customer’s responsibility to keep its email address current for notice purposes. For contractual purposes, Customer (a) consents to receive communications from UCG Technologies in an electronic form and (b) agrees that all terms and conditions, agreements, notices, disclosures, and other communications that UCG Technologies provides to Customer electronically satisfies any legal requirement that such communications would satisfy if it were to be in writing. Customer agrees that all disclosures, notices and communications are considered received by Customer within twenty-four (24) hours of the time posted to UCG Technologies’ website, or within twenty-four (24) hours of the time emailed to Customer.
20. Contacting UCG Technologies.
To contact UCG Technologies regarding this Agreement (i) email info@ucgtechnologies.com or (ii) write to 7100 E. Pleasant Valley Road, #250, Independence, OH 44131-5556, Attn: Contracts.
21. Changes in this Agreement.
UCG Technologies may amend the General Enterprise Terms, any Product and Service Specific Terms, or UCG Technologies’ Documentation, at any time in its sole discretion, by posting the revised version on UCG Technologies’ website and/or communicating it to Customer (each, a “Revised Version”). The Revised Version will be effective thirty (30) days from the time it is posted. Customer’s continued use of the Products and Services after the posting of a Revised Version constitutes Customer’s acceptance of such Revised Version.
22. Assignment.
This Agreement and any rights and licenses granted hereunder, may not be transferred or assigned by Customer and any attempted transfer or assignment will be null and void. UCG Technologies may assign this Agreement to any person or entity that is an affiliate, or acquires by sale, merger or otherwise, all, substantially all or a portion of UCG Technologies assets, stock or business. If another entity acquires UCG Technologies, or all, substantially all or a portion of UCG Technologies’ assets, stock or business Customer agrees that Customer’s encrypted stored data and information that UCG Technologies has collected from Customer, including personally identifiable information, may, and Customer consents to, the secure transfer of such information to such successor or assignee.
23. Force Majeure.
Any delay in the performance of any duties or obligations of either party (except the payment of money owed) will not be considered a breach of this Agreement if such delay is caused by a labor dispute, shortage of materials, fire, earthquake, flood, or any other event beyond the control of such party. The affected party will use reasonable efforts, under the circumstances, to notify the other party of the circumstances causing the delay and to resume performance as soon as possible.
24. Government Use.
The Products and Services constitute Commercial Off the Shelf (“COTS”) items as that term is defined in the U.S. Government Federal Acquisition Regulations (“FAR”). Government use rights are limited to those minimum rights required by the appropriate provisions of the FAR.
25. Other Provisions.
These General Enterprise Terms, the Order Form, the Product and Service Specific Terms and the Documentation are a complete statement of the agreement between Customer and UCG Technologies regarding the Products and Services and the matters covered in this Agreement. If any provision of the Agreement is invalid or unenforceable under applicable law, then it will be changed, interpreted or severed, as appropriate to accomplish the objectives of such provision to the greatest extent possible under applicable law, and the remaining provisions will continue in full force and effect. This Agreement does not limit any rights that UCG Technologies may have under trade secret, copyright, patent, or other laws. No waiver of any term of these General Enterprise Terms will be deemed a further or continuing waiver of such term or any other term.
Updated April 2018